diff --git a/The-Best-Way-to-Replace-the-Fluorescent-Starter-in-A-Windhager-Bug-Zapper.md b/The-Best-Way-to-Replace-the-Fluorescent-Starter-in-A-Windhager-Bug-Zapper.md
new file mode 100644
index 0000000..1952491
--- /dev/null
+++ b/The-Best-Way-to-Replace-the-Fluorescent-Starter-in-A-Windhager-Bug-Zapper.md
@@ -0,0 +1,7 @@
+<br>Fourmilab is surrounded on three sides by farmland. In the summer time, bugs are everywhere. Faced with this situation, defence in depth is the one choice: window screens, bats, Odonata on the pond, fly strips on the home windows and swatters in each room, and as the last level of terminal defence, excessive voltage bug zappers with ultraviolet fluorescent lures. These are not elegant devices, however they get the job carried out. The precept could not be easier-flying insects,  [Zap Zone Defender Experience](https://forums.vrsimulations.com/wiki/index.php/User:LillianaStreit) whose compound eyes see long-wave ultraviolet mild that mammalian eyes don't, are attracted by the lure tube, which appears to emit a dim blue light to people. To reach the light, they should fly between wires electrified with between 4 and eight kilovolts which, when the insect completes the circuit, kill-a-bug. The one drawback (at the very least if you are not a flying insect) is that they don't appear to last very long. After a little more than one summer, the bulb both begins to flash on and off like a strobe light or simply refuses to mild at all.<br>
+
+<br>Replacement bulbs are readily accessible and easy to install, however in my expertise, a minimum of half the time changing the bulb does not repair the problem. With no gentle to attract the insects, a zapper is ineffective, so even though its high voltage subsystem continues to work completely, most individuals junk it when altering the bulb would not make it gentle up. I'm manner too low-cost to be proud of such a state of affairs, so I decided to open up a failed bug zapper and see what was occurring. The supply of the issue proved to be so simple as I anticipated and  [Zap Zone Defender Experience](https://wikigranny.com/wiki/index.php/User:NigelCaldwell) as easy to treatment, so within the hope of saving any individual else the difficulty of figuring it out, I've scribbled these notes on tips on how to repair your own bug zappers. These instructions pertain to bug zappers made by the Windhager company of Salzburg, Austria,  [insect zapper](https://handiven.com/zap-zone-defender-a-comprehensive-study-on-bug-zappers-and-mosquito-control-2/) who have a dominant market share on this obscure trade here in Central Europe.<br>
+
+<br>Obviously, when you've got a bug zapper made by one other firm, it will look different inside and will conceivably use a completely completely different circuit for  [Zap Zone Defender Experience](https://patrimoine.minesparis.psl.eu/Wiki/index.php/Will_A_Bug_Zapper_Stop_Those_Annoying_Mosquitoes) the fluorescent lamp. Unless you perceive what you are doing and  [Zap Zone Defender](https://git.51aspx.com/jorgdarosa5813) know enough electronics to be assured you are not going to do one thing silly, it is best to leave things well enough alone and get a brand  [Zap Zone Defender Experience](https://transcriu.bnc.cat/mediawiki/index.php/The_6_Best_Mosquito_Zappers) new bug zapper. Further, we'll be disassembling and modifying a system which, when opened up,  [Zap Zone Defender Experience](https://searl.co/sunnylefebvre2) has exposed connections to doubtlessly lethal mains present and extremely unpleasant if not deadly high voltage. If you're sufficiently silly or scatterbrained that you're likely to neglect to tug the mains plug before sticking your hand inside the guts of a bug zapper, you must stop studying instantly and choose some safer mission, like making microwave popcorn. Initially,  [Zap Zone Defender Experience](http://xn--2s2b270b.com/bbs/board.php?bo_table=free&wr_id=311157) earlier than beginning this procedure, be sure you strive replacing the bulb and  [Zap Zone Defender](https://git.soy.dog/adachristopher) see if that fixes the issue.<br>
+
+<br>If it does, you've saved loads of time and, if not, you are going to wish a alternative bulb eventually, so why not have one on hand when the time comes? If a new bulb would not do the trick, the problem is almost certainly a failed fluorescent starter inside the field, so we'll must open it up. You did remember to unplug the zapper earlier than starting to disassemble it, did not you? First, remove the bug catcher tray at the bottom of the zapper, taking care not to spill useless bugs all around the ground or your work area. Depending on the model, the 2 halves of the body of the bug zapper are fastened along with four or six screws. On "industrial" models, these are 2 mm metric machine screws and nuts, but some "consumer" models use infernal "split slot" screws that are supposed to keep you from opening up the gadget. You see, you are a client, so you are expected to eat-purchase, purchase, purchase, not mend things which break.<br>
\ No newline at end of file